DES-1121 Free Questions Good Demo For DELL EMC DES-1121 Exam Top-Recommended DES-1121 Exam Questions [2022] Pass DELL EMC DES-1121 Exam 1. Two PowerMax arrays have been configured for replication using SRDF During a disaster recovery operation production has been transferred to the R2 devices at the target site. Which operation begins the transfer of accumulated invalid tracks from the R2s to the R1s while production work continues on the R2s? A. Update B. Fallback C. Resume D. Failover Answer: C 2.What does a service level define*? A. Expected average throughput for a Storage Group B. Expected average response time target for a Storage Group C. Expected average response time target for a disk group D. Expected average throughput for a disk group Answer: B 3.A PowerMax administrator is provisioning their environment using Solutions Enabler 9.0 and Unisphere for PowerMax Two large Storage Resource Pools (SRPs) have been configured for virtual provisioning. The pools are setup with RAID 5 (7+1) TDATs and there are no errors The administrator is able to fully access and browse each pool's elements and decided to make some modifications to the pools However, they are unable to edit or make any changes to the pool attributes. What is the most likely reason for this issue? A. An unsupported version of Solutions Enabler was used B. Pool modification is restricted to only Dell Technologies personnel C. One of the SRPs is not configured as the default SRP D. An unsupported version of Unisphere for PowerMax was used Answer: B 4.What is the largest TDEV PowerMaxOS 5978 can create? A. 16 TB B. 32 TB C. 64 TB D. 128 TB Answer: C Top-Recommended DES-1121 Exam Questions [2022] Pass DELL EMC DES-1121 Exam 5.DRAG DROP An RDF group on a VMAX3 array is being replicated in SRDF/A mode to a remote VMAX3 array. To accommodate application growth a new R1 device needs to be added to the RDF group SRDF/A consistency of the existing devices in the RDF group should be maintained when the new device is added. What is the correct sequence of steps for adding the new R1 device and making it available for application use? Answer: 6.Which product(s) support(s) only 7+1 in RAID 5 configurations? A. VMAX3 B. VMAX All Flash and PowerMax 8000 C. VMAX All Flash and PowerMax 2000 D. VMAX All Flash Answer: D 7.A host is connected to two PowerMax arrays with SRDF/Metro Host l/Os cannot be delivered across the SRDF link. The devices in the SRDF group have been forced into a Not Ready state to the host. Which attribute is set on the SRDF group to cause this behavior? A. Local Link Domino B. Local Auto Link Recovery C. Update After Resume Link D. Limbo Period Answer: C Go To DES-1121 Exam Questions Full Version